Stainless 304 exhaust/inlet pipe U bends 180 degree

Stainless 304 exhaust/inlet pipe U bends 180 degree
  • Click to enlarge
  • Click to enlarge

£14.39 £11.99 ExVAT

(Quantity discounts available)


Product Code: 5730

Stainless 304 exhaust/inlet pipe U bends 180 degree

All sizes are OD (outside diameter)

Wall thickness 1.5mm 304 grade is nice to weld less brittle than the 316 grade.

There a nice tight bend with a clean cut so you can but weld close connections to get really tight turns

We decided to stock these really useful polished 304 grade bends for custom exhausts or inlets, and water pipe systems.

You can simply use insulation tap to hold your bends to the straight pipe to mock up your system, holds well so you can take it to your local Tig welder and get him or her to cut a 10mm strip out your tape to tack weld in 2 places before removing all the tape.

Sizes we stock below sizes

32mm 1 ¼”

38mm 1 ½”

45mm 1 ¾”

51mm 2”

 

Product Code5730
ConditionNew
Weight0.5Kg

You can save money on this item when you purchase several at a time. The table below shows the minimum quantities required to benefit from this offer, and how much they'll cost.


QuantityPrice per unit
10+£10.79

Top