MEASURING

MEASURING
  • Carb jet cleaning tool

    Carb jet cleaning tool

    Carb jet cleaning tool 1.5mm to .05

    £5.99 £4.99 ExVAT

    £5.99 £4.99 ExVAT

  • Chain. Tool. Alignment Tool

    Chain. Tool. Alignment Tool

    Chain Alignment Tool Manufactured from aluminium This motorcycle chain alignment tool is quick and easy to use, we use them daily as most marks or measuring off the axle is not all that accurate.. Brilliant tool, just clamps ont…

    £9.06 £7.55 ExVAT

    £9.06 £7.55 ExVAT

  • Composite Digital Vernier

    Composite Digital Vernier

    Composite Digital Vernier Carbon fibre composite digital vernier caliper. Resolution 0 - 150 x 0.1mm / 0 - 6 x 0.01". 2-way measurement, internal and external.

    £16.99 £14.16 ExVAT

    £16.99 £14.16 ExVAT

  • Compression tester kit

    Compression tester kit

    Compression tester kit   Identifies worn valves and piston rings. Suitable for use on most petrol engines with 14mm or 18mm spark plugs. Easy to read dial gives accurate measurement of individual cylinder pressures. Reads up to 300ps…

    £25.00 £20.83 ExVAT

    £25.00 £20.83 ExVAT

  • External Micrometer METRIC

    External Micrometer METRIC

    External Micrometer Enamelled frame and satin chrome thimble and sleeve. Supplied in a strong storage case. Range 0 - 25mm. Resolution 0.01mm.

    £16.00 £13.33 ExVAT

    £16.00 £13.33 ExVAT

  • Feeler gauge kit Metric & Inches

    Feeler gauge kit Metric & Inches

    Metric 0.038 to 0.635mm Inches 0.0015 to 0.025" 

    £4.99 £4.16 ExVAT

    £4.99 £4.16 ExVAT

  • Feeler Gauge. Metric. (0.005-1.0MM)

    Feeler Gauge. Metric. (0.005-1.0MM)

    Feeler gauge. Metric. (0.005-1.0MM) 793828

    £3.49 £2.91 ExVAT

    £3.49 £2.91 ExVAT

  • INCLINOMETER

    INCLINOMETER

    General angle measurement. Clear, easy to read dial which is divided into 90 quadrants. Durable 100mm diameter plastic housing with a convenient magnetic base. Handy for finding out head stock angle

    £4.99 £4.16 ExVAT

    £4.99 £4.16 ExVAT

  • LASER INFRARED THERMOMETER

    LASER INFRARED THERMOMETER

    Pistol-grip infra-red thermometer with laser pointer for pinpoint targeting. LCD screen with backlit display. Measures in Celsius and Fahrenheit with range -20°C to +320°C (-4°F to +608°F) and accuracy of +/-2.5°C (+/- 4.5°F). Requ…

    £29.99 £24.99 ExVAT

    £29.99 £24.99 ExVAT

  • SCREW PITCH GAUGE

    SCREW PITCH GAUGE

    Used to determine internal and external thread forms. Blades clearly marked with thread sizes from 0.4-6mm

    £4.00 £3.33 ExVAT

    £4.00 £3.33 ExVAT

  • SPRING CALIPERS 3PCE SET

    SPRING CALIPERS 3PCE SET

    Ideal for engine builders and gas flowing

    £8.99 £7.49 ExVAT

    £8.99 £7.49 ExVAT

  • Steel Rule 150mm or 300mm

    Steel Rule 150mm or 300mm

    Steel Rule 150mm or 300mm Precision stainless steel rule. Clear, photo-etched markings. Metric and imperial graduations: 0.5mm, 1mm and 1cm metric; 1/2", 1/4", 1/8", 1/16", 1/32" and 1/64" imperial.

    £1.49 £1.24 ExVAT

    £1.49 £1.24 ExVAT

  • Tape measure 3M x 16mm

    Tape measure 3M x 16mm

    Tape measure 3M x 16mm

    £1.99 £1.66 ExVAT

    £1.99 £1.66 ExVAT

  • Tool. Jet gauges. 0.45mm-1.5mm or 1.5mm-3.0mm

    Tool. Jet gauges. 0.45mm-1.5mm or 1.5mm-3.0mm

    A handy little carburetor tool with jetting gauges from 0.45mm to 1.5mm or 1.5 to 3.00 A jet gauge allows for measuring the difference between two jet orifices, which may become necessary since different manufacturers use different scale…

    £14.99 £10.00
    £8.33 ExVAT

    £14.99 £10.00
    £8.33 ExVAT

  • Tool. Pressure Gauge. Tyre R Dial

    Tool. Pressure Gauge. Tyre R Dial

       Tyre R Dial Gauge Dual reading gauge with flexible 280mm hose. Large, easy to read scale 0-100psi in increments of 2psi and 0-10Bar in increments of 0.1bar. Overall length 420mm

    £10.00 £8.33 ExVAT

    £10.00 £8.33 ExVAT

  • Tool. Stand and magnetic base (no gauge)

    Tool. Stand and magnetic base (no gauge)

    LAST ONE, ONLY STAND NO DIAL GAUGE!!! This Magnetic Stand is perfect for attaching dial gauges to a vehicle. Whether you are checking cam timing, brake disc run out, it will firmly hold your dial gauge in place thanks to its powerf…

    £18.00 £15.00 ExVAT

    £18.00 £15.00 ExVAT

  • Tool. Timing. Metric Dial Indicator

    Tool. Timing. Metric Dial Indicator

    High precision shockproof 60mm dial indicator with low measuring force and 10mm travel. Rotating bezel with lock for zero setting. Range 0-10mm, graduation 0.01mm

    £22.50 £18.75 ExVAT

    £22.50 £18.75 ExVAT

  • VERNIER CALIPER STEEL

    VERNIER CALIPER STEEL

    High carbon steel Vernier caliper resolution 0-150x0.02mm. Four way measurement internal, external, depth and step.

    £12.00 £10.00 ExVAT

    £12.00 £10.00 ExVAT

Loading
Top