Puller. 2 in 1 For electric start or normal outer rotor set up.

Puller. 2 in 1 For electric start or normal outer rotor set up.
  • Click to enlarge
  • Click to enlarge

£13.00 £10.83 ExVAT

Product Code: 0856

Electric start puller

Specs
27mm internal  R/H thread and 27mm external L/H thread

The male L/H side of the puller are undercut for use when you can’t get the standard puller in. don’t use if it feels too lose


Well made hardened so it won’t strip the thread.

Some Chinese flywheels have an undercut thread so if it feels loose don’t attempt to try and pull it off in case the pull the thread off


Use with a 19mm spanner and a 27mm spanner or wrench.
Tips

Back out centre bolt to be sure the thread is all the way in flywheel.

Grease threads and the tip where it meets the crank to allow it to slip.

Make sure you back the bolt right off and be sure you have the puller threaded on all the way.

Product Code 0856
Condition New
Weight 0.3Kg
Top