Two in one flywheel puller.
Fits standard outer rotor type and electric start type set up’s all Chinese engines and Honda’s with 27mm threads
Specs
27mm internal R/H thread and 27mm external L/H thread
We have made the end flat with a centre pin so it won’t splay out the end of the crank like a lot of others do.
Well made hardened so it won’t strip the thread.
Use with a 19mm spanner and a 27mm spanner or wrench.
Tips
Back out centre bolt to be sure the thread is all the way in flywheel.
Grease threads and the tip where it meets the crank to allow it to slip.